auto-prime technology Auto-temp technology Designed to support consistent maintenance, safety, and code compliance. Available for Streivor's Trench Drains, Floor Sinks, and Floor Troughs.
 Integrated
Automation
Features auto-wash technology

Modernizing Kitchen Floor Troughs

For the 21st Century

Smart Trough Technology

Engineered for full code compliance, meeting all building, plumbing, and health standards, while transforming the traditional trough into an active, self-managing system that continuously supports sanitation, operational efficiency, and regulatory compliance.

Trough Prime-Wash

TECHNOLOGY

Automatic Trap Priming

Auto-Prime Technology solves these issues by providing a fully programmable priming system that maintains consistent plumbing code compliance.

Patent Pending

Plumbing Codes require all traps be equipped with a priming system to prevent sewer fumes, gases, and vermin from entering the kitchen. Due to poor or non-existent liquid-seal trap priming we discovered many kitchens have been experiencing these issues.

How It Works

During each Prime Cycle, water is delivered from Streivor’s Plumbing Control Station, to the trough and through a rinse head spraying only the amount of water necessary to prime the trap.

If the system detects that Auto-Wash or Auto-Tempering has been activated, then Auto Prime won’t be activated, therefore, reducing the amount of times the trap is primed, effectively capitalizing on water usage, preventing foul odors, vermin, and always maintaining code compliance with a primed trap.

Programmable Scheduling

· Cycle Start Times

Benefits

· Reduces the amount of water used for liquid-seal trap priming compared to other priming systems while capitalizing on water usage.

· Priming Duration

· Significantly reduces biological hazards and toxic sewer gases from entering the kitchen via the sewer line due to poor or non-existent liquid-seal trap priming.

Watch this clip to see Auto-Prime Technology in action!

Trough Tempering

TECHNOLOGY

On-Demand Tempering & Waste Line Protection

Streivor’s Tempering Technology is fully automatic to ensure compliance with plumbing codes that require wastewater exceeding 140°F to be tempered before entering the waste system.

Patent Pending

How it Works

A Resistance Temperature Detector (RTD) is installed within the trough. The RTD continuously monitors wastewater temperature entering the trough. When the RTD measures a temperature above the desired setpoint, tempering water is instantly delivered through a rinse head fitted with spray nozzles.

Benefits

· Tempers hot wastewater in the trough.

· Protects the waste line.

· Capitalizes on water use by tempering, rinsing, and priming simultaneously with the same water.

Inside Trough

All-In-One
Control System

Streivor’s Kitchen Control System can operate Smart Troughs, Kitchen Ventilation, and Fire Suppression Systems through one control panel.

Benefits

  • No added control costs.
  • No added electrical circuit requirements.
  • One seamless and reliable kitchen operation

Data Sheets

Floor Troughs with
Smart Trough Technology

VIEW

Plumbing Control Station

VIEW