Commercial Condensate Dish Machine Hoods Type II (Type 2)
Commercial Dish Machine Hoods are specifically designed to exhaust heat and steam produced by commercial dishwashing machines. There is an option to add a condensate baffle which is designed to catch the dripping condensation from the duct to prevent it from falling onto the equipment below.
Standard Features
• NSF Listed
• 2″ Gutter on all 4-Sides
• 18 Gauge Stainless Steel Ends
• Quality Construction
• Perforated Filter
• Optional Condensate Baffle
Exhaust Air Requirements
California Mechanical Code (CMC)
• Minimum exhaust 200 CFM per linear foot of
International Mechanical Code (IMC)
• Minimum exhaust 100 CFM per linear foot of hood length
DMH Vapor Hood for Dishwashers
DMH Vapor Hood for Dishwashers
The DMH Vapor Hood has been specifically designed to exhaust heat and steam produced by commercial dishwashing machines.
Model/Series | Min. Exhaust CFM/FT | Min. Overhang | Equipment |
---|---|---|---|
DMH-IMC | 100 | 8″ | Dishwasher |
DMH-CMC | 200 | 8″ | Dishwasher |
DMH Vapor Hood for Dishwashers with Optional Condensate Baffle
DMH Vapor Hood for Dishwashers with Optional Condensate Baffle
The DMH Vapor Hood with Optional Condensate Baffle has been specifically designed to exhaust heat and steam produced by commercial dishwashing machines.
Model/Series | Min. Exhaust CFM/FT | Min. Overhang | Equipment |
---|---|---|---|
DMH-CB-IMC | 100 | 8″ | Dishwasher |
DMH-CB-CMC | 200 | 8″ | Dishwasher |
* California Mechanical Code requires a minimum of 200CFM/FT